Shijiazhuang Ideal Auto Parts Co., Ltd.
ADR: No.8 Two Rd.,Zhizhao Industrial Park, Gaocheng District,Shijiazhuang City, Hebei Prov.China.
TEL:0311-89230108
E-mail:ideal@vip.163.com
Mail:052164
Sales Department Contact:Fu, Xiao Peng
Telephone:13933083306
ThinWallSteelBushing
Your Location:Shijiazhuang ideal Auto Parts Co., Ltd. >> PRODUCTS >> ThinWallSteelBushing >> browse- Product Category:ThinWallSteelBushing
- Views:times
- Product Description:...
THIN WALL Steel Bushing
R&D background
Copper-steel bimetal sleeves normally be used for concrete mixer's joint, but it has following shortages:
1\ lower surface hardness, weak wearability,
2\lower tensile strength, easy broken under heavy load,
3\for hasped sleeves, defection sometime happened on hasp position.
Thin wall steel sleeves can solve above-mentioned problem, good effect easily get under low speed and heavy load condition.
Definition:wall thickness of quenching steel sleeve between 2.0 to 3.0mm
Characteristics
Material |
Heat treatment |
Surface treatment |
Coaxality |
Medium carbon steel |
Normalizing treatment,167--229HB, internal surface high-frequency quenching, surface hardness 50--60HRC, hardening depth 0.5--1.3mm |
Vulcanizing or phosphatizing treatment
|
Less 0.05mm |
Using feature
1\ high basal toughness, higher internal surface hardness, shock resistance and wear ability are highly improved.
2\ due to the Vulcanizing or Phosphatizing treatment, friction factor is largely reduced to avoid early wearing failure.
3\suitable for heavy-duty working condition, replacing the bimetal sleeves and has been lot used on concrete mixer.